Click here Check price!!!
15CH AC 85V-250V 30A rf home automation remote control switch 433MHZ 1 transmitter and 12 recevier Radio smart control SKU: 5482Item Description:Specification:1.TransmitterChannel: 12CHRemote Control Distance:50m/150ft(Please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference.)Encode: Fixed code, solderingFrequency:315/433MhzPower Supply: 1 X 12V-23Abattery(NOT Include)2.ReceiverChannel:1 CHPower Supply (Operating Voltage): AC 85V-220VMax. Current: 30ARelay:30A 250VAC/ 30VDC, 30A 240VACSensitivity:-105 dBmOperating Temperature:-40‘C ~ 80’CSize:70*50*20mm (with cover)Output way:Momentary/Toggle adjusted freely by the Jumper on the receiver.Control Mode:Toggle/Self-Lock:Press->On; Press again->OffPress one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).Momentary/Jog:Press and hold->On; Release->OffKeep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )(Factory Original Setting is Momentary, please Choose the function or Change it by yourself.)Learn code and Remove Code:1. Learn: Power on state, press the learning button on the receiver for one time, the indicator light turns on to off, press any button of the remote control, the indicator flashes 2 times and off. It means you learn it successfully.2. Remove: Power on state, press the learning button on the receiver for about 8 seconds, the indicator light turns on to off, it means the code has been removed successfully.Note:We default send 315Mhz, if you need 433Mhz, pls leave a message under your order, thanks!Packing list:12xReceiver1 xTransmitter(Battery not include)
Click here Check price!!!
0 comments