Click here Check price!!!
DC 12V 10A 6 Receivers, RF 1 Channel Wireless Remote Control Switch System, Automation Controller SKU: 5250Item Description:Specification:1.TransmitterChannel: 6CHRemote Control Distance:50m/150ft(Please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference.)Encode: Fixed code, soldering 2260 2262Frequency:315/433Mhz (Default 315MHz)Power Supply: 1 X 12V/23A (NOT Include)2.ReceiverChannel:1 CHPower Supply (Operating Voltage): DC12VRelay:10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DCSensitivity:-105 dBmOperating Temperature:-40‘C ~ 80’CSize: 35*32*17mmOutput way : Jog, Self -lockis AdjustableControl Mode:Toggle/Self-Lock: Press->On; Press again->OffPress one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).Momentary/Jog: Press and hold->On; Release->OffKeep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )(Factory Original Setting is Momentary, please Choose the function or Change it by yourself.)Learning and removing method:1. There is a learning button on the control panel of touch switch, the button is used to learn and remove the code. 2. Press the learning button for one time, the indicator light turns on to off. Press any key on the remote controller, the indicator flashes two times and off. It means you learn it successfully.3. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote controller.4. Delete remote control method: Keep pressing the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.Note:We default send 315Mhz, if you need 433Mhz, pls leave a message under your order, thanks!Packing list:6 xReceiver1 xTransmitter(Battery not include)
Click here Check price!!!
0 comments